How To Change Your Keurig Water Filter. Soak a new cartridge in clean water for 5 minutes. Set the install date to the correct month so you know when to swap it.
The starter kit includes one water filter handle and two replacement water filter cartridges. Grab the filter holder and push the tabs on both sides of the base to separate the water filter. Rinse the new filter under the sink for 1 minute.
How To Replace Keurig 2.0 Water Filter:
The cleaning should be done several times. 1) remove the water reservoir from your keurig. The right way to do this is to put the rounded side up.
Next, Make Sure The Lower Hold Is Right Below This New Filter.
Changing a keurig water filter does not take more than ten minutes. Cleaning the machine and accessories. While the filter is soaking in the water, remove the water reservoir from your keurig coffee maker and empty the water into the sink.
The K Elite Uses Charcoal Water Filters Measuring Roughly 2 Inches Long By 1.125 Inches Tall.
First, you should soak the new keurig charcoal water filter in a container of cool water for about 10 minutes. Using your thumbs, press down on the tabs on both sides of the base and pull down to separate it from the rest of the holder. Pull up the filter holder to gently remove the old water filter.
Changing Your Keurig Filter Is A Simple Process That Only Takes A Few Minutes To Complete.
Change the filter in the housing part. Slide your new filter in the filter holder and keep the rounded side facing up. Remove the water tank from the machine.
Keurig Says Its Filters Should Exist Inverse Every Two Months.
The starter kit includes one water filter handle and two replacement water filter cartridges. Unscrew the screw housing of the keurig machine, remove the old keurig filter and clean the chamber. Open the package for the new water filter, take out the water filter and soak for up to 5 minutes.